Flat Rate/Free Shipping to Canada/US!
(Details here)
Flat Rate/Free Shipping to Canada/US!
(Details here)
This masking material is water-soluble, so its concentration can be adjusted by diluting it with water. (Note: When applying water-based hobby pain...
View full details5.0 / 5.0
3 Reviews
This assortment features four popular types of Mr. Masking Tape. You can try out the differences in adhesive strength. Set Contents MT602 Width 10...
View full details5.0 / 5.0
1 Review
* By adhering the paint mist to the honeycomb mesh filter, paint backflow can be reduced. * Attach it using the white adhesive tape on the cardboar...
View full detailsBecause the arched section has no file marks, it's less likely to damage the reverse edge!The arched section has no file marks, and the arched surf...
View full details5.0 / 5.0
1 Review
Everything you need for brush painting is included! This brush painting set is suitable for a wide range of users, from beginners to veterans. The ...
View full details5.0 / 5.0
1 Review
This brush set can be attached to the lids of round bottles of finishing materials such as the newly packaged Mr. Cement and Mr. Weathering Color. ...
View full details5.0 / 5.0
1 Review
A wide version of the popular "FT04 Mr. Simple Paint Booth" is now available! The honeycomb filter uses the same wide size as the previous model pa...
View full details4.9 / 5.0
32 Reviews
“Nipper PN-125” is a standard nipper. “Nipper PN-125” does not have any special specs, but it is an “all-purpose nipper ” for everyone to use in an...
View full details5.0 / 5.0
13 Reviews
Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model ...
View full details5.0 / 5.0
13 Reviews
Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to conform to rough and curved surfaces. Volum...
View full details4.6 / 5.0
5 Reviews
Mixing bottles of 60ml and 100ml. Good for hobby lacquer/acrylic/enamel.Supplied by GunPrimer
5.0 / 5.0
18 Reviews
Arguably the best nippers for gunpla. GodHand SPN-120 is made with superior quality and precision for you to cut the small nub with leaving little...
View full details5.0 / 5.0
6 Reviews
This set of mini-sized stick files gives you different degrees of roughness, plus a handy size that allows you to smooth out even the smallest area...
View full details5.0 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.8 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
5 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.7 / 5.0
3 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
3 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
6 Reviews
Sponge file No. 4000 is exclusively for polishing and polishing.Simply polish it to give it a glossy surface.Ideal for finishing and polishing the ...
View full details5.0 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.3 / 5.0
6 Reviews
The official Bandai Spirits Parts Separator is here - a tool that's a must-have for beginners and veterans alike! Using the expertise of plamo manu...
View full details5.0 / 5.0
4 Reviews
Mr Cement S is a thin (low viscosity) that features strong gap filling properties, as capillary action will spread the cement to fill small cracks ...
View full details5.0 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.8 / 5.0
6 Reviews
Perfect grip to hold the parts and make your paiting / drying life easier! Because of wood material on stick part, you can cut to adjust your need....
View full details4.8 / 5.0
5 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.8 / 5.0
4 Reviews
Mr. Thinner is now available with both large and extra large spouts, great for preventing spills when pouring onto a dish or into a container. What...
View full details
Save up to 0%
Save %
OLFA Designer Graphics Art Knife with 5 Blades (216BS) - Yellow/Blue/Pink/Black
5.0 / 5.0
3 Reviews
Japan version of AK-5 A pen-type knife suitable for cutting thin materials and extremely small parts. The mouthpiece firmly fixes the blade so that...
View full details5.0 / 5.0
6 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
1 Review
This handy set includes three brushes commonly required in the finishing of plastic models.High Finish (HF) brushes feature specially designed resi...
View full details5.0 / 5.0
4 Reviews
Mr.Cement is the appropriate liquid cement to use when you are looking to attach plastic parts together. It is the best choice when gluing together...
View full details5.0 / 5.0
1 Review
This set of stick files gives you different degrees of roughness, plus a convenient size that allows you to smooth out large areas on your model ki...
View full details4.0 / 5.0
1 Review
This handy set includes three brushes commonly required in the finishing of plastic models.Horse-hair bristle brushes feature a wooden handle desig...
View full details5.0 / 5.0
4 Reviews
This stainless steel tool is designed for stirring bottle paints, and for blending different color shades. One end is shaped like a small spoon, wh...
View full details5.0 / 5.0
2 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full detailsA stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full detailsVery convenient stick for painting small parts. A metal clip holds parts firmly, so you can paint without dirtying your hands with paint. Clips are...
View full details