GodHand Bit Blade set [Flat Blade] (Set of 5) (GH-BBH-1-3)

High-precision carving knife that can be used with a pin vice

This is a small, precise flat carving knife that can be used in addition to a pin vice.

The entire shaft is cylindrical, but the tip of the blade is flat.

Both sides of the blade can be used as a flat knife, but the angle at which it is easy to carve will differ depending on which side of the blade is facing up.

Set of 5 pieces, sizes from 1mm to 3mm.

The shafts are all unified at 3mm, so there is no need to replace the collet chuck on the pin vice body, making it easy to replace.

*As this is a blade, please handle it with care when opening the lid or using it.

• Unified shaft size is 3mm. There is no need to replace the collet on the pin vise when replacing the blade.
• Blade size: 1mm, 1.5mm, 2mm, 2.5mm, 3mm
• By using different blade widths, modeling quality and work efficiency will improve.
• You can carve erasers, wood, plastic, putty, resin, and even stone for seal carving.
• Comes with a case for easy storage and transportation.

[Difference from Spin Blade]
Spin Blade is also a type of flat blade, but the blade is attached differently from Bit Blade. Spin Blade has a thin blade and the blade shape is symmetrical from front to back. This makes it easier to rotate.
The flat blade of Bit Blade is slanted on one side and vertical on the other side. It is not suitable for rotation because it is asymmetrical from front to back, but the slanted part is thicker, making it stronger than Spin Blade.
When pushing through plastic board, the spin blade will cut like a double-edged knife, while the flat blade of Bit Blade will cut like a single-edged knife.