Modeling Tools

A linear guide used in curved surfaces.The length of the groove is 25mm.A strengthening tape is included for attachment to highly curved surfaces (...

Guide used for thick, short engravings.The length of the groove is diverse from 2~5mm. (Click for more details) Spec Size : 105*175mm Weight : 0.0...

A linear tape type guide.You can cut as much as you want.You can choose from 2mm used in small parts and 3mm which is more commonly used. (Click he...

Blade length (approx.): between 4.5cm - 5.5cm Cut width: 1.20mm

Z50010DLC (0.1MM) Z500125DLC (0.125MM) Z50015DLC (0.15MM) Z50020DLC (0.2MM) Z50030DLC (0.3MM) Z50040DLC (0.4MM) Z50050DLC (0.5MM) D.L.C. (Diamond...

Two replacement Micro Chisels from GRIDA. GRIDA is a multi-directional MICRO CHISEL with a practical mechanical pencil scriber for panel line scrib...

Basic form of straight guide from Gunprimer.  The groove’s length is diverse from 1~50mm, allowing customers to choose from.  The angles are marked...

A cutter exclusively for hard plastic boards such as acrylic and PVC boards. It can also be used to cut grooves into various hard materials. The bl...

Specially designed hexagonal shaft drill bit for model making!You can drill holes without worrying about freewheeling. A set of 8 pieces with a 4mm...

Sheet Dimension (approx.): 5cm x 11.5cm.

The slim, even rotating washer fits in the palm of your hand and is easy to hold! It fits comfortably in your hand and is stable, so you can work s...

Introducing the new "triangular knife" in the Bit Blade series, designed with ease of engraving in mind! This precision triangular knife is desig...

The tool is precision ground using high-grade tungsten steel material, with a hardness of 92.1HRC, extremely fine grain size, and higher material d...

Chisel Bit that serves as both spin blade and chisel all in one. Dia of body.:3.0mmIndividual bit available from 1.1mm to 2.9mm

Create a unique perforation design and enable delicate work.1. Freely design the perforation pattern. Use of a pencil is recommended so that the ce...

A flat drill that can carve round molds without the need for pilot holes! This is a flat drill bit with a center guide that is fixed to a pin vice....

Excellent straightness! A non-slip blade drill! Even on curved surfaces, it will not slip or shift from the position where it was first inserted,...

Specially designed hexagonal shaft drill bit for model making!You can drill holes without worrying about freewheeling. A set of 8 drill bits with a...

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:1.6mm,1.7mm, 1.8mm, 1.9mmDia of body.:3.0mm

Sheet Dimension (approx.): 5.5cm x 10cm.

Madworks N009 Neron French Curves (C)

The tool is precision ground using high-grade tungsten steel material, with a hardness of 92.1HRC, extremely fine grain size, and higher material d...

This set includes a range of different bit types for the Electric Handy Router, including a cylindrical piece for larger areas, a bit for making ho...

High-precision carving knife that can be used with a pin vice. This is a small, precise round carving knife that can be used in addition to a pin...

No pilot holes required! A flat drill that can easily dig round molds!Set of 3, starting from Φ3.5mm in 0.1mm increments!A flat drill bit with a ce...

No pilot holes required! A set of 4 slightly different sized flat drill bits that can easily dig into round molds! This is a flat drill bit with a ...

Wider than 3mm in diameter Spin Blades release! New size of Spin Blade which you can use for drilling holes and as chisels release! New diameters...

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:2.6mm, 2.7mm, 2.8mm, 2.9mmDia of body.:3.0mm

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:2.1mm,2.2mm, 2.3 mm, 2.4mmDia of body.:3.0mm

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:1.1mm,1.2mm, 1.3mm, 1.4mm Dia of body.:3.0mm

Chisel Bit / Spin Blade Set Serves as both spin blade and chisel all in one. Size number engraving makes your work easier. Dia of blade:0.5mm, 0....

Building model kits often uses all sort of tools such as nippers and pliers. When not in use, having them lying around not only takes up space on t...

Madworks N007 Neron French Curves (A)

Suitable for adding curve panel line. With reference to the curvature, select an appropriate stencil from the templates Use the stencil to mark an...

Madworks N008 Neron French Curves (B)

It's a simple hexagonal design that gets to the point.Compatible with the brand's chisels, it is well balanced in terms of weight and has several c...