Skip to content
Various site improvements in progress. You will notice gradual changes along the way. Feel free to provide suggestions!
Various site improvements in progress. You will notice gradual changes along the way. Feel free to provide suggestions!
Madworks N006 Neron Pivot Hole Scribers (Angle)

Madworks N006 Neron Pivot Hole Scribers (Angle)

by Madworks
83 kr - 83 kr
83 kr
83 kr - 83 kr
83 kr
These tools are a collection of photo-etched blades (1.4mm 1.5mm 1.6mm 1.7mm 1.8mm 2.0mm 2.2mm 2.4mm 2.6mm 2.8mm 3.0mm) designed to create pivot holes on model kits:
 
  1. Use a regular 0.5mm drill bit and drill the central point where the pivot hole will be;
  2. Pin the tip of the blade to this central pin, then spin the blade to cut through the surface;
  3. Result;
  4. Add details using Neron N004, or other MADWORKS large selections of detail-up parts.
 
N003 and N006 differs in the shape of the edge of pivot holes.
Suggestion: Attached the spin blade to a drill-bit handle. This way is easier to operate