Skip to content

Non-Pre Order Items and Non Sale Items (for Growave or Campaign Use)

Initial D 1/24 Nissan Skyline GT-R V specII (BNR32) Takeshi Nakazato (Fujimi Initial D Series No.02)

Fujimi
£28.27 - £28.27
£28.27
£28.27
£28.27 - £28.27
£28.27
Only 1 left!

Initial D series "BNR32 GTR Takeshi Nakazato" appears in a new chassis specification equipped with "four-wheel independent alignment adjustment mec...

View full details

Initial D 1/24 Nissan Sileighty Sato Mako (Fujimi Initial D Series No.03)

Fujimi
£28.27 - £28.27
£28.27
£28.27
£28.27 - £28.27
£28.27
Only 1 left!

The Initial D series "Sil80 Mako Sato" is now available with a new chassis design featuring a "four-wheel independent alignment adjustment mechanis...

View full details

Kamen Rider 1/12 New Cyclone (Fujimi Super Hero Series SUH-3)

Fujimi
£36.97 - £36.97
£36.97
£36.97
£36.97 - £36.97
£36.97
Only 1 left!

The New Cyclone is a machine developed jointly by Takeshi Hongo, Tobei Tachibana, and Kazuya Taki. Following the Cyclone, it was used by Kamen Ride...

View full details

Dspiae Colored Gap-filling CA Glue (BP02)

Dspiae
£3.26 - £3.26
£3.26
£3.26
£3.26 - £3.26
£3.26
in stock

For gap-filling

Initial D 1/32 Nakazato's 32 GT-R (AOSHIMA THE SNAP KIT SERIES CM#4)

Aoshima
£16.31 - £16.31
£16.31
£16.31
£16.31 - £16.31
£16.31
Only 1 left!

The R32 GT-R of “Takeshi Nakazato”, leader of the Myogi Night Kids, joins the lineup. NISMO bumper Lip spoiler 17-inch wheels 17-inch tires Sports...

View full details

1/32 Subaru Sambar Truck (Sterling Silver Metallic) (Aoshima The Snap Kit Series No.05-SS)

Aoshima
£12.50 - £12.50
£12.50
£12.50
£12.50 - £12.50
£12.50
Only 1 left!

Introducing the first light truck in Aoshima's "Rakupla" model-kit lineup -- the Subaru Sambar! This rear-drive vehicle is known as the "Porsche of...

View full details

Back to the Future Part II Pull-Back 1/43 DeLorean Time Machine

Aoshima
£6.52 - £6.52
£6.52
£6.52
£6.52 - £6.52
£6.52
Only 1 left!

This easy-to-assemble model kit of the fabulous DeLorean time machine as seen in the classic 1989 film "Back to the Future Part II" features pull-b...

View full details

DSPIAE Customization Plastic Plate for Models - 0.5mm (PC-05GY)

Dspiae
£5.70 - £5.70
£5.70
£5.70
£5.70 - £5.70
£5.70
in stock

3 sheets of 190mm x 250mm high quality gray plastic plates with scale for plastic model customization.

VFG Macross Frontier Non-Scale VB-6 Konig Monster

Aoshima
£89.72 - £89.72
£89.72
£89.72
£89.72 - £89.72
£89.72
in stock

The Konig Monster from "Macross Frontier" joins the "V.F.G. (Variable Fighter Girls)" lineup from Aoshima! The unit itself can transform to recreat...

View full details

1/10 Rosado Starflower Lily MK3 Model Kit (NONZERO STUDIO (Hemoxian) Hemoxian X Earnestcore Craft)

NONZERO STUDIO (Hemoxian)
£52.74 - £52.74
£52.74
£52.74
£52.74 - £52.74
£52.74
Only 2 left!

NONZERO STUDIO (Hemoxian) Hemoxian X Earnestcore Craft 1/10 Rosado Starflower Lily MK3 Model Kit

1/10 JS-009 Reverberation of Medta Jiangshi Jiulian Model Kit

NONZERO STUDIO (Hemoxian)
£52.74 - £52.74
£52.74
£52.74
£52.74 - £52.74
£52.74
Only 1 left!

Nonzero Studio revealed the Jiulian Model kit from the Reverberation of Medta Series! This kit includes the following parts: Jiulian base model ×...

View full details

1/100 Zodiac Guardian Baffarion Model Kit (NONZERO STUDIO (Hemoxian) x ToysComic)

NONZERO STUDIO (Hemoxian)
£52.74 - £52.74
£52.74
£52.74
£52.74 - £52.74
£52.74
Only 1 left!

The first mecha model kit in the Zodiac Guardian series, launched jointly by Nonzero and ToysComic, Baffarion, will be available in the summer...

View full details

1/15 Yue Long Dragon Call Model Kit (Standard Edition) (NONZERO STUDIO (Hemoxian) x NARAKA BLADEPOINT x Kunio Okawara)

NONZERO STUDIO (Hemoxian)
£53.83 - £53.83
£53.83
£53.83
£53.83 - £53.83
£53.83
Only 2 left!

HeMoXian x Naraka: Bladepoint x Kunio Okawara releases Yue Long Model Kit! Product Details Manufacturer: He Mo Xian Category: Assembly Action...

View full details

1/100 Thor Model Kit "The Entropy of GODS"

NONZERO STUDIO (Hemoxian)
£53.83 - £53.83
£53.83
£53.83
£53.83 - £53.83
£53.83
Only 1 left!

NONZERO STUDIO (Hemoxian) 1/100 Thor Model Kit "The Entropy of GODS"

1/100 Salamander Metal Frame Model Kit

Eddas
£32.62 - £32.62
£32.62
£32.62
£32.62 - £32.62
£32.62
Only 1 left!

1/100 Salamander Metal Frame Model Kit: Salamander main body ×1 Leg beam particle sword effect parts ×2 Poseable hands ×4 pairs Beam particle c...

View full details

1/144 The Round Table Knights Soul Spear Lamorak

SNAA
£20.66 - £20.66
£20.66
£20.66
£20.66 - £20.66
£20.66
in stock

1/144 The Round Table Knights Soul Spear Lamorak

IN ERA 1/72 Infinity Nova RMD FENRIR Model Kit

SNAA
£107.66 - £107.66
£107.66
£107.66
£107.66 - £107.66
£107.66
Only 1 left!

IN ERA 1/72 Infinity Nova RMD FENRIR Model Kit.  27cm tall when completed.

God Hand Nipper PN-125

GodHand Nipper PN-125

GodHand
£7.61 - £7.61
£7.61
£7.61
£7.61 - £7.61
£7.61
in stock

“Nipper PN-125” is a standard nipper. “Nipper PN-125” does not have any special specs, but it is an “all-purpose nipper ” for everyone to use in an...

View full details

DSPIAE Soft Tip Acrylic Marker

Dspiae
£1.63 - £1.90
£1.63
£1.63 - £1.90
£1.63 - £1.90
£1.63
Only 1 left!

DSPIAE SOFT TIP ACRYLIC MARKER New paint formula with higher rate of coverage for optimized user experience. Flexible soft tip made of premium spon...

View full details

Mr.Mark Setter (MS232)

GSI Creos
£2.55 - £2.55
£2.55
£2.55
£2.55 - £2.55
£2.55
in stock

Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model ...

View full details

Mr.Mark Softer (MS231)

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to conform to rough and curved surfaces.  Volum...

View full details

Gundam Marker GM01 - Black (Fine)

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

Fine point marker for filling in the panel lines on plastic models. Over marks can be cleaned up with a normal eraser. Lacquer base.

Gundam Marker GM301 Pour Type - Black

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

You can pour ink into the mold only by putting the tip of the pen. You can use a rubber eraser for the excess paint. Lacquer base.

DSPIAE Super Metallic Color Markers

Dspiae
£2.44 - £7.61
£2.44
£2.44 - £7.61
£2.44 - £7.61
£2.44
in stock

Vibrant color rendition Comparing to traditional acrylic tips, DSPIAE's nylon tip used on its markers features more fluent paint flow, smoother coa...

View full details

Gunprimer GMB-5 Mixing Bottle (45ml, 60ml, 100ml) - set of 5

Gunprimer
£2.55 - £2.99
£2.55
£2.55 - £2.99
£2.55 - £2.99
£2.55
in stock

Mixing bottles of 60ml and 100ml. Good for hobby lacquer/acrylic/enamel.Supplied by GunPrimer

Action Base 5 (Clear)

Bandai
£4.89 - £4.89
£4.89
£4.89
£4.89 - £4.89
£4.89
in stock

Assemble your own display stand for your Gundams and other mecha model kits! This new base from Bandai features a base, measuring 2.8cm by 2cm, wit...

View full details

GodHand Precision Nippers SPN-120 (with Protection Cap)

GodHand
£40.78 - £40.78
£40.78
£40.78
£40.78 - £40.78
£40.78
in stock

Arguably the best nippers for gunpla.  GodHand SPN-120 is made with superior quality and precision for you to cut the small nub with leaving little...

View full details

Gundam Marker GM02 - Gray (Fine)

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

Fine point marker for filling in the panel lines on plastic models. Over marks can be cleaned up with a normal eraser. Lacquer base.

Gundam Marker GM302 Pour Type - Gray

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

You can pour ink into the mold only by putting the tip of the pen. You can use a rubber eraser for the excess paint. Lacquer base.

Gundam Marker GM300 - Gundam Marker Eraser

GSI Creos
£2.33 - £2.33
£2.33
£2.33
£2.33 - £2.33
£2.33
in stock

This is a removing liquid of pen type which removes GUNDAM MARKER painted onto the parts. You can dare to paint the small parts carelessly and then...

View full details

Bandai Spirits Model Sanding Stick Set (Mini)

Bandai
£4.89 - £4.89
£4.89
£4.89
£4.89 - £4.89
£4.89
in stock

This set of mini-sized stick files gives you different degrees of roughness, plus a handy size that allows you to smooth out even the smallest area...

View full details

Yasuri no Oyaji (やすりの親父) Film Stick File / Sanding Stick 800 Grit (PY05)

Yamatocomp
£3.26 - £3.26
£3.26
£3.26
£3.26 - £3.26
£3.26
in stock

A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...

View full details

High Grade (HG) Gundam Witch from Mercury 1/144 XVX-016 Gundam Aerial

Bandai
£14.13 - £14.13
£14.13
£14.13
£14.13 - £14.13
£14.13
in stock

Gundam Aerial from "Mobile Suit Gundam: The Witch of Mercury" joins Bandai's HG model-kit lineup! The shield can be separated into 11 parts, which ...

View full details

Yasuri no Oyaji (やすりの親父) Film Stick File / Sanding Stick 400 Grit (PY07)

Yamatocomp
£3.26 - £3.26
£3.26
£3.26
£3.26 - £3.26
£3.26
in stock

A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...

View full details

Yasuri no Oyaji (やすりの親父) Film Stick File / Sanding Stick 1000 Grit (PY04)

Yamatocomp
£3.26 - £3.26
£3.26
£3.26
£3.26 - £3.26
£3.26
in stock

A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...

View full details

Bandai Spirits Parts Separator

Bandai
£2.99 - £2.99
£2.99
£2.99
£2.99 - £2.99
£2.99
in stock

The official Bandai Spirits Parts Separator is here - a tool that's a must-have for beginners and veterans alike! Using the expertise of plamo manu...

View full details