SAB Premium Chisels / Panel Liners / Engravers - ZERO 1

Argama Specialist Note:

SAB ZERO 1 and 2 are blades designed to bevel scribe lines, scribe tough to reach corners and convert seamlines into panel line designs.

To convert seamlines into panel line designs:

1. Get the two edges as close as you can without fully assembling, leaving a thin gap
2. Determine the appropriate ZERO Chisel to use based on scale and desired panel line width
3. Use ZERO Chisel to scribe over the seamline gap from step 1
4. Once done, use the desired chisel size (most common are between 0.3mm - 0.5mm) to rescribe over the bevel of the seamline created in step 3

If you desire a wider line, remember to take it slow and be careful. Work your way out the sizes to prevent any undesired damage on the piece.

----

Premium chisel from Korea for panel lining.  SAB chisel are individually made by hand, and have undergone many production processes by professional craftsmen with 20 years of experience.  The chisel are produced to provide great cutting power, strength and flexibility.  Handle part is made of stainless steel which is hygienic and resistant to corrosion or deformation.

Available sizes (mm):  ZERO 1/ ZERO 2/ 0.075 / 0.1 / 0.125 / 0.15 / 0.2 / 0.25 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.5 / 2.0 / 3.0 / 4.0

Recommend adding SAB Panel Liner Holders or BMC Chisel Holders to increase comfortableness.