Flat Rate/Free Shipping to Canada/US!
(Details here)
Flat Rate/Free Shipping to Canada/US!
(Details here)
4.9 / 5.0
34 Reviews
“Nipper PN-125” is a standard nipper. “Nipper PN-125” does not have any special specs, but it is an “all-purpose nipper ” for everyone to use in an...
View full details5.0 / 5.0
13 Reviews
Mr. Mark Setter is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model ...
View full details5.0 / 5.0
13 Reviews
Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to conform to rough and curved surfaces. Volum...
View full details4.6 / 5.0
5 Reviews
Mixing bottles of 60ml and 100ml. Good for hobby lacquer/acrylic/enamel.Supplied by GunPrimer
5.0 / 5.0
7 Reviews
This product has a quicker setting time than standard Tamiya Extra Thin Cement. This cuts the amount of time used in constructing models, and has t...
View full details5.0 / 5.0
4 Reviews
No crevice is too small for this flowing adhesive, which was developed to flow into and stick the small spaces between two plastic parts which have...
View full details5.0 / 5.0
19 Reviews
Arguably the best nippers for gunpla. GodHand SPN-120 is made with superior quality and precision for you to cut the small nub with leaving little...
View full details5.0 / 5.0
6 Reviews
This set of mini-sized stick files gives you different degrees of roughness, plus a handy size that allows you to smooth out even the smallest area...
View full details4.8 / 5.0
5 Reviews
THE golden standard cement for model building. Brush is mounted to the lid. Widely used by modelers around the world!
4.8 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.3 / 5.0
6 Reviews
The official Bandai Spirits Parts Separator is here - a tool that's a must-have for beginners and veterans alike! Using the expertise of plamo manu...
View full details5.0 / 5.0
5 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.7 / 5.0
3 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
5 Reviews
Masking Tape for painting use. 6mm width.
5.0 / 5.0
3 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
5 Reviews
Use to open up components you assembled.The gripping handle lets you pry open items with ease!
5.0 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
6 Reviews
Sponge file No. 4000 is exclusively for polishing and polishing.Simply polish it to give it a glossy surface.Ideal for finishing and polishing the ...
View full details5.0 / 5.0
4 Reviews
Mr Cement S is a thin (low viscosity) that features strong gap filling properties, as capillary action will spread the cement to fill small cracks ...
View full details5.0 / 5.0
3 Reviews
Dspiae Panel-Line Eraser is a tool for cleaning excess panel line, and cleaning off excess paint (enamel, acrylic, wash, etc)Comes with two ends, e...
View full details5.0 / 5.0
4 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
2 Reviews
Masking Tape for painting use. 10mm width.
5.0 / 5.0
3 Reviews
Masking Tape for painting use. 18mm width.
4.8 / 5.0
5 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
6 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details5.0 / 5.0
4 Reviews
Mr.Cement is the appropriate liquid cement to use when you are looking to attach plastic parts together. It is the best choice when gluing together...
View full details5.0 / 5.0
6 Reviews
For fine cutting or cutting small parts
5.0 / 5.0
1 Review
This set of stick files gives you different degrees of roughness, plus a convenient size that allows you to smooth out large areas on your model ki...
View full details3.0 / 5.0
1 Review
This new cement is specially formulated for use with ABS plastic parts such as the masts in 1/350 scale ship model kits, which cannot be attached...
View full details5.0 / 5.0
2 Reviews
A stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full details4.8 / 5.0
4 Reviews
A new type of pour on adhesive! Compared with previous pour on type adhesives, the drying speed has been dramatically improved and adhesive strengt...
View full detailsTamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. The pu...
View full detailsA stick-shaped file that is ideal for gate treatment and surface treatment when making models.Since it is stick-shaped, it is easy to grip, can be ...
View full detailsThis is dedicated masking tape developed for plastic models. Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to co...
View full details4.0 / 5.0
3 Reviews
This item will come in very handy the next time you assemble model kit parts incorrectly! The cutting edge is made thin so that it can be easily in...
View full detailsContains 2x #600, 2x #800 and 1x #1000