Cutting/Engraving/Scribing

No pilot holes required!Flat drill bit that can dig 45° chamfered round moldsAs with conventional spin molds, no pilot holes are required with a dr...

A flat drill that can carve round molds without the need for pilot holes! This is a flat drill bit with a center guide that is fixed to a pin vic...

Precision carbide needle for plastic modeling use.Set of 2: "Kurve" and "Gerade"Kurve: for curved linesGerade: for straight linesDia of body.:3.0...

Hi precision V-shaped chisel bitsof 4 pcs set.It's attachable on pin vices. Shanksize: 3mm Blade angle: 5, 20, 45,and 90 degreeMaterial: Special ...

No pilot holes required! A flat drill that can easily dig round molds!Set of 3 with diameters from 4.0mm to 0.1mm increments!A flat drill bit with ...

No pilot holes required! A flat drill that can easily dig round molds!Set of 3, starting from Φ3.5mm in 0.1mm increments!A flat drill bit with a ce...

A flat drill that can easily dig round molds without the need for pilot holes!Set of 3, starting from 3.1mm in 0.1mm increments!A flat drill bit wi...

No pilot holes required! A set of 4 slightly different sized flat drill bits that can easily dig into round molds! This is a flat drill bit with a ...

No pilot holes required! A set of 4 slightly different sized flat drill bits that can easily dig into round molds! This is a flat drill bit with a ...

Set of pin vise and bits set for making various types of holes. GH-PBS-DC Pin Vise for 2.5～3.2mm round shaft drill bits.Material: Iron, Blass, TPE ...

Wider than 3mm in diameter Spin Bladesrelease! New size of Spin Blade which you can usefor drilling holes and as chisels release! New diameters' ...

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:2.6mm, 2.7mm, 2.8mm, 2.9mmDia of body.:3.0mm

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:2.1mm,2.2mm, 2.3 mm, 2.4mmDia of body.:3.0mm

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:1.6mm,1.7mm, 1.8mm, 1.9mmDia of body.:3.0mm

Chisel Bit SetServes as both spin blade and chisel all in one.Dia of blade:1.1mm,1.2mm, 1.3mm, 1.4mm Dia of body.:3.0mm

Chisel Bit / Spin Blade Set Serves as both spin blade and chisel all in one. Size number engraving makes your work easier. Dia of blade:0.5mm, 0....

The connection is hexagonal and fits securely, so it won't spin freely!The magnet system makes it super easy to attach and remove the drill bit!If ...

The iron cap and collet firmly grip the drill bit and prevent it from spinning freely!Two collets support sizes from Φ0.1 to Φ3.2mm! Comes with a r...

An ultra-compact power pin vise specialized for ultra-fine drills! For ultra-fine drills of Φ1.0mm or less! Ideal for precision work! Can be used w...

For fine cutting or cutting small parts

Precision nipper for plastic, designed for lefthanded persons. More durable and easier to handle compared with Ultimate nippers! Protection Cap is...

It is a cutter mat made of heat resistant tempered glass. Since the cutting edge slides on the surface of the glass, it can cut smoothly without ap...

Durable and easy to handle! Rust-resistant stainless steel nippers perfect for getting started with single-edged blades! The blades are thicker and...

Better work efficiency with more precisionBest drill blades specifically for modelingDrill Bit set of 5: 1.0～3.0mm diameter in 0.5mm increments

Better work efficiency with more precisionBest drill blades specifically for modelingDrill Bit set of 8: 2.1/2.2/2.3/2.4/2.6/2.7/2.8/2.9mm diameter

Better work efficiency with more precisionBest drill blades specifically for modelingDrill Bit set of 8: 1.1/1.2/1.3/1.4/1.6/1.7/1.8/1.9mm diameter

Better work efficiency with more precision!Best drill blades specifically for modeling.Drill blade used with pin vise perfects functionalityDrill b...

  Compatible blade for Pin Vise. Chisel Bit Set (mm)・1.0/1.5/2.0/2.5/3.0Dia.3mm Cutting AbilityPlastic The attachment parts are 3mm in diameter an...

A tool set for drilling a hole with no need for a pilot hole Pin vise [3mm] blade set, efficiently make holes clean and straight. Five types of dia...

A small, easy-to-use plastic sheet cutting tool! A cutting tool with a blade length of 40 mm that can cut plastic sheets neatly with light force. I...

Beautiful cut! Amazing sharpness! A savior for plastic plate processing! By using a commercially available cutter blade, you can replace the blade ...

“Nipper PN-125” is a standard nipper. “Nipper PN-125” does not have any special specs, but it is an “all-purpose nipper ” for everyone to use in an...

Arguably the best nippers for gunpla.  GodHand SPN-120 is made with superior quality and precision for you to cut the small nub with leaving little...

Everything you need to clean and maintain your nippers are includedSet Includes: Maintenance oil (rust resistant lubricant 1 liquid type 0.2 fl oz...

This handy synthetic leather cap will help protect your nipper tips when not in use.

Protection cap for blades of nipper, closing and covering the tip of them. With snap fastener, you do not have to worry that cap would come off by ...