Skip to content
You can now pay by instalment using AfterPay on orders over $180 CAD! (after tax and shipping)
You can now pay by installment using AfterPay on orders over $180 CAD! (after tax and shipping)

HIQ Parts Center Driller (1pc) (CEND2050)

Write a review
| Ask a question
Sold out
Original price $45.99 CAD - Original price $45.99 CAD
Original price $45.99 CAD
$45.99 CAD
$45.99 CAD - $45.99 CAD
Current price $45.99 CAD
Jigs for manual processing.
● Assists in drilling 1 mm diameter holes on the end face and side of a round bar.
-Compatible with plastic round bars with diameters of 2, 3, 4, and 5 mm

●A jig for making straight holes in the core (end face) and side of a plastic round bar.
●For 1mm diameter drill bit only.
●If you want to drill a hole smaller than 1mm in diameter, please use a drill bit with a 1mm shaft and a small diameter tip (However, the total length of the blade must be 18mm or more for core and end face processing).

● Please match the plastic rod itself to the specified size for high-precision processing.
●Example: When using a 2.0mm hole, 2.00 to 2.05mm is possible.

●When using for the first time, it is necessary to pass through the hole for the drill.
●By inserting a 1mm size drill, you can remove the excess plating thickness inside the drill hole.

●Be sure to use a drill bit of the specified size. The inner wall of the hole may be scraped and the accuracy may drop, and the blade may not come off.
●There may be scratches on the surface that do not affect use. Please note

[Product specifications]
-Size: W25mm x D30mm x H8mm
-Material: Brass (nickel plated)
- Processable material: plastic
-Country of origin: Japan